Table of Contents
Advertisement
Similar to before, you may not be able to reach your cutters to RIGHT Q6 E terminal.
Don't worry. We'll make it easier now, while we check your work to this point. With the
exception of this one wire, the RIGHT power amplifier module is free to lift out as soon
as you remove the two #6 screws that hold the RIGHT heat sink to the chassis. Unscrew
the screws, lift out the module, and cut the wire that you couldn't reach in the previous
step.
Save the RIGHT module and mounting hardware. We will re-use the heat-sink and some
of the other bits as described in "Salvaging the heat sinks from the amplifier modules".
Page 8 of 32
Advertisement
Table of Contents
