Table of Contents
Advertisement
There's No Voltage at All
Check:
1. Is the AC socket powered?
2. Is the amp plugged in?
3. Is the power turned on?
Remove the power, check and replace the fuse with a properly rated fuse. Sometimes,
fuses just get tired. Sometimes they blow to prevent a disaster. At this point, we're not
sure what the case is here.
Maintaining a respectful distance, power the amp again, and observe if the fuse blows. If
it blows quickly, unplug the amp, and go to
Supply Circuit Description, for more information. The FAQs at the end of the document
may be especially helpful.
At this point, if you're scared, confused, or nervous, find someone who knows what
they're doing to help you. Above all, be safe!
www.updatemydynaco.com
Page 15 of 32
, the Power
Advertisement
Table of Contents
