Table of Contents
Advertisement
Step 7. Disconnect Terminal or PC from COMM IN port. Disconnect the terminal or PC
from the COMM IN port used to locally configure the DSXpert unit.
4 SYSTEM VERIFICATION
4.1 LED Test
Test the LEDS by depressing the LAMP TEST button on the front of the control card. All
LEDs on the front card modules should illuminate.
Table 11. Line Access Card Slot Positions
ETHERNET PORT (RJ-45, 10BT)
Pin #
1
2
3
4
5
6
7
8
Figure 24. LAMP TEST pushbutton
ADCP-80-552 • Issue 2 • November 2000
Signal
TD+
TD-
RD+
—
—
RD-
—
—
15972-A
© 2000, ADC Telecommunications, Inc.
Page 31
Advertisement
Table of Contents
