ADCP-80-552 • Issue 2 • November 2000
2.1.4
Test Equipment Card
Caution: Electronic modules can be damaged by electrostatic discharge (ESD). Before
handling modules, wear an anti-static discharge wrist strap to prevent damage to electronic
components. Place modules in packing material when transporting or storing. When working
on modules, always place them on an approved anti-static mat that is electrically grounded.
Install test equipment card as shown in
installed in front slot 10. The corresponding rear test equipment card is installed in rear slot
labeled "TST". The test equipment cards are hot-swappable and can be installed without
powering down the chassis.
Page 10
2000, ADC Telecommunications, Inc.
Figures 8
Figure 8. Installation of Front Test Equipment Card
and 9. The front test equipment card is
15965-A