Table of Contents
Advertisement
ADCP-80-552 • Issue 2 • November 2000
2.2 Cable Routing
2.2.1
DS3/E3 Line Ports
For each DS3/E3 circuit, connect the line ports as shown in
DS3/E3 line ports and typical connection configurations, respectively. The DS3/E3 line ports
are located on the rear of the DSXpert chassis. Up to 18 DS3/E3 circuits per chassis are
supported. Use BNC cables, 75 ohm shielded coax for DS3/E3 circuit connections.
Page 18
2000, ADC Telecommunications, Inc.
Figure 14. DS3/E3 Line Access Ports on Rear of Chassis
Figures 14
to 16, which show the
14047-B
Advertisement
Table of Contents
