Table of Contents
Advertisement
ADCP-80-552 • Issue 2 • November 2000
2.2.3.1
Daisy-Chaining Chassis (Optional)
Optionally, several DSXpert chassis can be daisy-chained at their COMM ports and FB
(Fallback) ports. This allows up to four units to share a single communication link, such as a
common IP address. Both the COMM and the FB ports must be used. Additionally, refer to
the DIP switch tables for proper DIP switch settings when daisy-chaining.
To daisy-chain the COMM/FB ports, connect the ports as shown in
Figure
20. Use type 4
cable (straight-through) for the COMM port connections. Use RJ-45 shielded straight-through
cable for the FB port connections.
14019-B
Figure 20. Daisy-Chaining Communication Ports
Page 25
© 2000, ADC Telecommunications, Inc.
Advertisement
Table of Contents
