System Select/Set Button - Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual

9.7.7

System SELECT/SET button

Configuring the SELECT/SET button
On the SCALANCE X-200RNA, the SELECT/SET button is used to
• Change the display mode
• Reset to the factory defaults
• Define the dialog box and the LED display
You will find a detailed description of the individual functions available with the button in the
section "SELECT/SET button (Page 49)".
On this page, the functionality of the SELECT/SET button can be restricted or fully disabled. This
is possible for the following three functionalities:
• "Restore Factory Defaults"
• "Enable/Disable Reset"
• "Set Fault Mask"
Figure 9-13 Select/Set button configuration
SCALANCE X-200RNA
Operating Instructions, 04/2022, C79000-G8976-C342-07
Functional description and configuration using Web Based Management
9.7 The "System" menu
101