Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual page 106

Functional description and configuration using Web Based Management
9.8 The "X200" menu
• "Power Line 1"
– "Up":
– "Down":
• "Power Line 2" (SCALANCE X204RNA only, not illustrated)
– "Up":
– "Down":
• "Fault Status"
The fault status of the SCALANCE X-200RNA is shown here. The following table contains
examples of possible error messages. If more than one problem has occurred, they are listed
in the text box one above the other.
Redundant power line down
Link down on monitored port
No Fault
106
Power supply 1 (line 1) is applied.
Power supply 1 is not applied or is below the permitted voltage.
Power supply 2 (line 2) is applied.
Power supply 2 is not applied or is below the permitted voltage.
Error messages Meaning
The redundant power supply has failed.
The connection to a monitored port is interrupted.
The SCALANCE X-200RNA has not detected a fault
(the signaling contact has not responded and the
fault LED is not lit).
Operating Instructions, 04/2022, C79000-G8976-C342-07
SCALANCE X-200RNA