Sfp991-1Ld(C); Sfp992-1Ld(C) - Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual

Device description
5.6 SCALANCE X204RNA EEC interfaces
*) Depending on the cable used:
• If you are using at least OM1 fibers (attenuation ≤ 1.5 dB/km, bandwidth length product ≥
500 MHz*km), you can reach a cable length of up to 3 km.
• When are using fibers with attenuation values ≤ 1 dB/km, you can reach a cable length of up
to 5 km.
You can find additional information in the "Industrial Ethernet / PROFINET Passive network
components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
5.6.3.3

SFP991-1LD(C)

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
5.6.3.4

SFP992-1LD(C)

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
46
100Base-LX complying with IEEE 802.3
100 Mbps (Fast Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
26 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-LX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
10 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
-9.5 dBm
-3 dBm
-19 dBm
-3 dBm
Operating Instructions, 04/2022, C79000-G8976-C342-07
-15 dBm
-8 dBm
-28 dBm
-8 dBm
SCALANCE X-200RNA