Table of Contents
Advertisement
Functional description and configuration using Web Based Management
9.8 The "X200" menu
Settings in WBM
In WBM, you can set the monitoring of the power supply (SCALANCE X204RNA only) and the
device-related link monitoring. The settings are made in three separate dialog boxes:
Figure 9-20
Enable Power Monitoring (SCALANCE X204RNA only)
Here, you specify which of the two power supplies of the SCALANCE X204RNA (line 1 and line
2) is monitored. A fault is then indicated by the message system when there is no power on one
of the monitored lines (line 1 or line 2) or when the voltage is too low (less than 14 V).
Note
This dialog box is not displayed with the SCALANCE X204RNA EEC because it does not have a
redundant power supply.
112
SCALANCE X204RNA Fault Mask Power Monitoring
Operating Instructions, 04/2022, C79000-G8976-C342-07
SCALANCE X-200RNA
Advertisement
Table of Contents
