Scalance X204Rna Eec Interfaces; Tp Interfaces - Siemens SIMATIC NET SCALANCE X-200RNA Operating Instructions Manual

Device description

5.6 SCALANCE X204RNA EEC interfaces

5.6 SCALANCE X204RNA EEC interfaces
5.6.1

TP interfaces

Connector pinout
On the SCALANCE X204RNA EEC (PRP and HSR), the TP interfaces are implemented as RJ-45 jacks
with the MDI-X assignment (Medium Dependent Interface Autocrossover) of a network
component.
Figure 5-7
Table 5-3
Pin number
Pin 8
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
Note
TP cords or TP-XP cords with a maximum length of 10 m can be connected to the RJ-45 TP port.
With the IE FC cables and IE FC RJ-45 plug 180, an overall cable length of up to 100 m is permitted
between two devices depending on the cable type.
Note
The interfaces of the SCALANCE X204RNA EEC (PRP and HSR and PRP/HSR) meet the
requirements for environment B according to IEEE 802.3, section 33.4.1.1.
42
RJ-45 jack
Pin assignment
Assignment
n. c.
n. c.
TD-
n. c.
n. c.
TD+
RD-
RD+
Operating Instructions, 04/2022, C79000-G8976-C342-07
SCALANCE X-200RNA