3.2
Device LED Button Behavior
3.2.1
EPD-230, EPD-232 button behaviors:
item Status
1
SW1 (P1) no press
2
SW2(P2) no press
3
SW3 (P3) no press
Press SW1(P1) &
4
SW3(P3)
If device loses con-
5
nection, press either
SW1\SW\SW3
3.2.2
EPD-230, EPD-232 LED behavior
Remote control commands from the Router.
Item
Status
1
LED1
2
LED2
3
LED3
EPD-230/232 User Manual
Action
Press button for 0.5 sec and
release button
Press button for 0.5 sec and
release button
Press button for 0.5 sec and
release button
Step1: Long press button (SW1 &
SW3) when LED1,LED2 and
LED3 off
Step2: LED2 flash (0.5 sec toggle
LED2)
after hold SW1& SW3 for 5 sec
Step3: LED2 on after hold SW1 &
SW3 for 10 sec
Step4: Release SW1 & SW3 keys
then LED2 off
Press and release button.
Action
Remote Control by DeviceOn/ePaper API
Remote Control by DeviceOn/ePaper API
Remote Control by DeviceOn/ePaper API
14
Result
Refresh EPD to Page 1
Refresh EPD to Page 2
Refresh EPD to Page 3
Reset to default and reboot
Note: All images and set-
tings in the device will be
deleted.
Leave sleep mode and try to
connect to a network .
Result
On/Off/Blink
On/Off /Blink
On/Off/Blink