Table of Contents
Advertisement
4.3.8
Smart Warehouse Pick to Light Scenario
1.
EPD device in standby Mode, only shows stock status
2.
When picking material request inputs, the ERP sends out an API to DeviceOn/
ePaper to trigger:
Action 1: Change to the image as below.
Action 2: Light up an LED to guide the picker to pick the material
Below is the comparison between traditional card and EPD.
3.
When picker see the LED indicator on the drawer.
Action1: Picker take out the material according to the EPD's information|
Action2: Picker uses barcode scanner to scan the QR code
Aciton3: ERP system will update the stock status and trigger the API to request
EPD to update the information
Action4: Printer print out the label directly.
EPD-230/232 User Manual
52
Advertisement
Table of Contents
