Clamp Bracket Removal And Installation; Removal And Disassembly; Reassembly And Installation - Mercury FourStroke 2.5 Service Manual

Clamp/Swivel Bracket and Driveshaft Housing

Clamp Bracket Removal and Installation

Removal and Disassembly

1. Remove the locknut on the port clamp bracket. Remove the bolt.
2. Remove the clamp brackets from the swivel bracket.
c
b
3. Remove the nut and washer from each end of the spacer rod.
4. Remove the tilt pin from the starboard clamp bracket.
5. Remove the thrust support and damper.
f
e
d
c

Reassembly and Installation

1. Assemble the spacer rod to the starboard clamp bracket.
2. Secure the spacer rod with a washer and nut.
3. Install the tilt pin through the starboard clamp bracket.
Page 5A-10
a - Port clamp bracket
b - Swivel bracket
c - Locknut
a
26114
a -
b -
c -
d -
e -
f -
a
b
26118
Port clamp bracket
Spacer rod
Tilt pin
Nut and washer (2 each)
Thrust support and damper
Starboard clamp bracket
90-8M0065421 NOVEMBER 2012