Mercury FourStroke 2.5 Service Manual page 67

Carburetor and Fuel Pump
7. Tighten the choke cable holder bolt and the throttle opener bolt to the specified torque.
a
a - Throttle opener
b - Throttle opener bolt
c - Throttle rod
d - Choke wire
e - Choke cable holder bolt
f - Carburetor mounting bolt (2)
g - Gasket (2)
h - Insulator
Description
Throttle opener bolt
Choke cable holder bolt
8. Attach the fuel pump outlet hose to the carburetor inlet.
9. Attach the fuel pump inlet hose to fuel shutoff valve. Secure the hoses with hose clamps.
IMPORTANT: Route the hoses as shown.
10. Install the fuel shutoff valve and hoses along the side of the powerhead.
• Align the fuel shutoff valve with the fuel shutoff knob
• The fuel hose to the fuel tank snaps into the bracket attached to the cylinder block
Page 3A-14
b
c
g
h
g
e
d
f
49876
Nm lb‑in.
6 53
6 53
90-8M0065421 NOVEMBER 2012
lb‑ft