Mercury FourStroke 2.5 Service Manual page 189

Tiller Handle
3. Install the bushing and rubber shaft onto the throttle shaft.
a
b
a - Rubber shaft
b - Bushing
c - Throttle shaft
d - Throttle friction components
e - Tiller handle
4. Install the throttle cables through the slot in the tiller handle cover.
c
5. Install the throttle cable ends in the throttle shaft drum.
6. Install the throttle shaft into the throttle handle.
7. Install the grip onto the tiller handle. Secure the grip with the screw.
8. Secure the throttle shaft with the bracket and screw.
Page 7B-8
c
d
b
d
c
e
a - Tiller handle cover slot
b - Throttle cable ‑ deceleration
c - Throttle cable ‑ acceleration
a
26030
a
a - Throttle shaft
b - Drum
c - Throttle cable ‑ deceleration
d - Throttle cable ‑ acceleration (with match mark)
b
26031
26033
90-8M0065421 NOVEMBER 2012