Installation - Mercury FourStroke 2.5 Service Manual

Carburetor and Fuel Pump
8. Disconnect the choke cable and the throttle linkage from the carburetor. Remove the carburetor from the engine.
b
c
d
e

Installation

1. Connect the choke cable and the throttle linkage to the carburetor.
IMPORTANT: The carburetor mounting gaskets must be oriented correctly with the intake manifold before installing the
carburetor. Improper orientation of the carburetor mounting gaskets will result in poor engine performance.
2. Inspect the carburetor mounting gaskets for damage. Replace the gaskets as required.
Page 3A-12
a - Crankcase breather hose
b - Throttle linkage
c - Vent hose (1 of 2)
d - Choke cable
e - Carburetor/air silencer bolt (M6 x 85) (2)
a
41668
a - Orientation notch
90-8M0065421 NOVEMBER 2012