Scanning Using The Keys On The Machine - Sharp AR-5516 Operation Manual

SCANNING USING THE KEYS ON
THE MACHINE
When scanning is performed by this method, the application that has been set in Button Manager will automatically
start and the scanned image will be pasted into the application. For the steps to allocate applications using the
Button Manager or other settings, see
Note If the machine is in copy mode, press the [SCAN] key (
set copy settings.
Scanning from the operation panel of the machine
1
Press the [SCAN] key (
2
Place the original(s) that you wish to
scan on the document
glass/SPF/RSPF.
[When scanning from the document glass]
mark
Original size scale
[When scanning from the SPF/RSPF]
46
"BUTTON MANAGER SETTINGS"
).
When the SCAN indicator
lights up, the machine
enters scanner mode.
Place the original face
down on the document
glass. Align the edge of
the original with the
original size scale, to be
centred with the centring
mark ( ).
Set the original(s) face up
in the document feeder
tray.
(p.48).
) to switch to scanner mode and clear the previously
3
Press the [SCAN MENU] key to begin
scanning.
• To return to copy mode from scanner mode,
Note
press the [SCAN] key (
ALL] key (
• For limitations on copying and printing in
scanner mode, and scanner mode while
copying or printing, see
COPY, PRINTER, AND SCANNER
MODES" (p.14).
Scanning will start and the
scanned data will be
transferred to the
application.
The target application can
be selected by the [SCAN
MENU] key.
For the default application
allocated to each key, see
"BUTTON MANAGER
SETTINGS" (p.48).
The display will show the
number of the [SCAN
MENU] key that you
pressed, and the number
will light and the SCAN
indicator will be blinking.
) or [CLEAR
).
"OPERATION IN