Routine Maintenance; Checking The Total Output Count And Toner Level; Checking The Total Output Count - Sharp AR-M160 Operation Manual

Chapter 7
7

ROUTINE MAINTENANCE

This chapter explains how to keep the machine operating smoothly, including viewing copy count, and scan count,
the toner level indicator, and cleaning the machine.
CHECKING THE TOTAL OUTPUT
COUNT AND TONER LEVEL

CHECKING THE TOTAL OUTPUT COUNT

From the "0" display, you can check the total output count, total copy count, and total scan count as explained
below.
The total output count is all pages (for both printing and copying) printed by the machine. The total count, copy
count, total scan count, and copy count for each account (if enabled) are reset to 0 when the count reaches 50,000.
[Total output count]
Hold down the [0] key.
READ-END
Example: Total number of pages output is 12,345.
• Each 11" x 17" size page is counted as two
Note
pages.
• During a copy run, pressing the [0] key
shows the number of completed copy
pages, not the total output count.
The total output count
appears in the display
while you hold down the
key.
The total output count
appears sequentially in
two parts while you hold
down the [0] key.
[Total copy count]
Hold down the [READ-END] key (
READ-END
The total number of pages printed in printer
Note
mode can be calculated by subtracting the
total copy count from the total output count.
[Total scan count]
Hold down the [ ] key.
READ-END
).
The total copy count
appears in the display
while you hold down the
key.
The count display and
counting method are the
same as for the total
output count.
The total scan count
appears in the display
while you hold down the
key.
The count display and
counting method are the
same as for the total
output count.
71