To Find a Drive or Enclosure
M
1. Go to the Identify D2 page.
If needed, see "To Bring up the Network Storage Agent Maintain Devices Page" on
page 3-9 and "To Find a Disk's Device Name and SCSI ID on an Update D2 Page" on
page 3-10.
2. Blink the amber Identify LED on a drive slot by clicking on the Slot, ID, or
Device Name link associated with the drive.
The following screen displays.
If needed, refer to
array.
3. Click the Back button to return to the Identify page.
3-12
Sun StorEdge D2 Array Installation, Operation, and Service Manual • February 2002
for where the disk LEDs are located on the front of the
FIGURE 1-2