Switching On The System In Safe Environments; Interferences; Appropriate Use - Nolangroup n-com bluetoothkit X Series User Instructions And Safety

1.2.

Switching on the system in safe environments

When using the N-Com system, comply with all limitations and instructions

related to the use of cell phones.
Do not turn on your cell phone or the N-Com system whenever their use is

forbidden or when the devices can cause interference or dangerous situations.
Turn off while refueling. Do not use the N-Com system in filling stations. Do not

use the device near combustible materials or chemical products.
Turn off in proximity to explosive materials.

1.3.

Interferences

All phones and devices with wireless signal transmission are subject to interferences
that may affect the performance of the device connected to them. These interferences
are not ascribable to a defect of the N-Com system.
1.4.

Appropriate use

Use the device only
documentation. Do not attempt to disassemble, tamper with or modify any part of the
N-Com system.
Caution: Adjust the volume of the N-Com system (where provided) and of the audio
sources connected to it before you use the system on the road.
Caution: Adjusting the volume to very high levels may cause damage to your
hearing.
Caution: Adjust the volume of the N-Com system (where provided) and of the audio
sources connected to it so as to avoid audio reproduction at high volumes.
Constant exposure to high audio volumes may damage your hearing.
Caution: An incorrect installation of the system in the helmet may alter the
aerodynamic and safety characteristics of the helmet itself, thus creating
dangerous conditions. Install the N-Com system according to the instructions
in the normal position, as described in the product
5