Nolangroup n-com bluetoothkit X Series User Instructions And Safety page 18

Only for full-face helmets: Insert the chin guard (microphone side), gently placing
the microphone in its housing. Then press down on the red tab until the chin guard
is locked in place on the helmet.
Fig. 34
18
Only for flip-up / jet helmets:
Secure the neck roll (left side), being careful to

slide
microphone, then clicking it in the press stud. (Fig.
34)
Secure the neck roll (right side) by hooking up the

plastic ring to the press-stud.
Fig. 35
the neck roll
Position the speakers in the special

housings in the cheek pads. Fasten
the speakers using the special fixing
adhesives.
Reposition

following
found in the user manual of the
helmet.
plastic ring behind
the comfort
the specific instructions
the
padding