Resetting The System - Nolangroup n-com bluetoothkit X Series User Instructions And Safety

Fit the Pillion Passenger's helmet with Basic Kit2 (positioning the basic electronic

card in its housing).
Connect the Rider's helmet to the Pillion Passenger's helmet using the Intercom

Wire (sold separately) in the following manner:
- connector A (smaller, L-shaped) in the Rider's helmet (equipped with Bluetooth
kit X-Series)
- connector B (larger one) in the Pillion Passenger's helmet.

12. RESETTING THE SYSTEM

In case the system locks up and no longer carries out the commands, you need to
disconnect the battery for a few seconds. Then reconnect the battery.
N.B.: This operation does not erase the affiliations with Bluetooth devices or the
system settings.
27