Connector Board Cable; Connector Board - HP Chromebook 11a Maintenance And Service Manual

Reverse this procedure to install the touchpad.

Connector board cable

To remove the connector board cable, use this procedure and illustration.
Table 5-8 Connector board cable description and part number
Description
Connector board cable
Before removing the connector board cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the connector board cable:
1. Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect the
connector board cable from the connector board.
2. Release the ZIF connector (2) to which the connector board cable is connected, and then disconnect the
connector board cable from the system board.
3. Remove the connector board cable (3).
Reverse this procedure to install the connector board cable.

Connector board

To remove the connector board, use this procedure and illustration.
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 23).
21).
Spare part number
M97112-001
21).