Connector Board Cable - HP Pavilion 15 Maintenance And Service Manual

Connector board cable

Description
Connector board cable
Before removing the connector board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. WLAN module (see
c. Fan (see
d. System board (see
Remove the connector board cable:
1. Turn the system board upside down with the front toward you.
2. Release the ZIF connector (1) to which connector board cable is connected, and then disconnect
the connector board cable (2) from the system board.
Reverse this procedure to install the connector board cable.
56 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 33)
WLAN module on page
Fan on page 46)
System board on page
31), and then remove the following components:
37)
48)
Spare part number
L01846-001