Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Direct IP Idis DC-S6261X-A
Summary of Contents for Direct IP Idis DC-S6261X-A
- Page 1 Network Camera Quick Guide DC-S6261X / DC-S6261X-A Powered by...
-
Page 2: Safety Precautions
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated. -
Page 3: Fcc Compliance Statement
FCC Compliance Statement THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. -
Page 4: Dome Cover
Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may differ depending on the situation. Item Network Camera Quick Guide Terminal Blocks (2 ea.) Screws and Anchors (each 3 ea.) Install Mount Ferrite Core Guide Pattern... -
Page 5: Inserting A Sd Memory Card
Inserting a SD Memory Card Lens SD Memory Card Slot Insert a SD memory card into the SD memory card slot with the ‘micro SD’ print facing upward. Dome Cover Assembly Part Factory Reset Button Network Port Power Alarm I/O, Audio I/O Camera Installation Removing the Dome Cover Push the SD memory card until it disengages from... -
Page 6: Installation
Installation • Check the wall or ceiling to see if it needs to be reinforced. The camera may fall off if the wall or ceiling is not strong enough to support its weight. • Install the camera in a shaded area. If the camera is installed in direct sunlight, it may be affected adversely. -
Page 7: Specifications
Specifications Operating Temperature -10°C ~ +50°C (14°F ~ +122°F) Boot Up Temperature 0°C ~ +50˚C (32°F ~ +122˚F) Operating Humidity 0% ~ 90% Power Source , PoE(IEEE 802.3af, Class3) Power Consumption , 0.77A, 9.2W PoE, IEEE 802.3at (Class 3), 10.0W Approval FCC, CE External Dimensions (Ø... - Page 12 IDIS Co., Ltd. For more information, please visit www.idisglobal.com...
Need help?
Do you have a question about the Idis DC-S6261X-A and is the answer not in the manual?
Questions and answers