Event; Alarm In - Direct IP IDIS DC-S1163 Series Operation Manual

Event

Configure event detection settings.

Alarm In

Select Alarm In to enable alarm in event. With alarm
in event enabled, alarm in detections by the alarm in
connector will be assumed as events.
• Title: Enter the alarm-in device's name.
• Type: Select the alarm in type.
• Event Action: Select an alarm in event alert action.
• Day & Night Mode: Select if you do not wish to use
the IR cut filter when an event is detected. Select this
option to override the Day & Night Mode settings
under Video > Camera. Select B&W Mode to enable
black and white mode when an event is detected.
Expiration of the detected event will disable B&W
Mode and restore IR Cut Filter.
- Alarm Out: Select if you wish to generate an alarm
out.
- Send Email: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.
- Audio Alarm: Select this option to generate an
audio alert and then choose an audio file (.wav).
- FTP Upload: Select this option if you wish to
upload images to the FTP server.
- Record: Select this option to record video.
- Move PTZ to: Select a preset position to move the
camera to that position. Preset positions can be set
from the Remote Setup (Video>PTZ>Preset).
Event Action settings must be configured correctly in
order to perform event actions.
Part 1 - Remote Setup
37