Flexoffice; Flexoffice: Does The Old Flexoffice Version Support The Flexline Plus Instruments; Flexoffice: Does Flexoffice Support Instruments Other Than The Flexline Total Stations; Flexoffice: Why Are There Two Different Versions Of Flexoffice - Leica FlexLine Frequently Asked Questions Manual

3.0

FlexOffice

3.1 FlexOffice: Does the old FlexOffice Version support the FlexLine plus instruments ?

No – FlexLine plus instruments do require the new FlexOffice Version 2.2 (or higher) or LGO Version 8.3
(or higher) to run properly. The SW maintenance date of FlexOffice V 2.2 is June 1
Neither "LGO Tools" nor "Construction Data Manager (CDM)" do support FlexLine properly.
– even if some functionality might work !
3.2

FlexOffice: Does FlexOffice support instruments other than the FlexLine Total Stations?

No, FlexOffice only supports FlexLine Total Stations. This step was required to make the operational
concept of FlexOffice more intuitive. If other instruments shall be supported as well LGO is the right
choice.
3.3

FlexOffice: Why are there two different versions of FlexOffice?

One of the main features of FlexLine is the scalability of the products. The same idea is applied to the
FlexOffice with its two versions. The choice is always yours.
3.4

FlexOffice Standard / Advanced: What is the difference between them ?

FlexOffice Standard delivers a high level of functionality, whilst FlexOffice Advanced includes even more
features. Below is a list of components and features.
FlexOffice Standard: Data Exchange Manager, Format File Creation, Instrument Configuration Manager,
Codelist Management, Firmware Upload, Project Management, simple import of ASCII data, Viewing and
Editing of Points and Observations, Recalculation of Setups.
FlexOffice Advanced: In addition to the FlexOffice Standard functionality, FlexOffice Advanced includes,
Image Referencing, HTML reports, TPS Processing, Road Converters for Roadworks 3D, COGO and
advanced ASCII export.
3.5

FlexOffice: Upgradeability: What upgrade options do I have with FlexOffice?

FlexOffice Standard cannot be upgraded with options.
Flex Office Advanced can be upgraded by license key with the following modules:
 Design & Adjustment 3D"
 "GIS/CAD Export" (advanced dxf and dgm export)

"Surface and Volume Calculation".
These protected options have the same Art. No. and functionality as the LGO options – however just
support FlexLine Instruments.
3.6

FlexOffice: What benefit do I have with FlexOffice in comparison to Leica Geo Office Tools?

FlexOffice is much more intuitive to use and includes additional functionalities like Viewing and Editing of
Observations and recalculation of setups.
3.7

FlexOffice: Is FlexOffice protected?

Both products require an Entitlement ID during installation. These ID can be ordered under the following
Article Numbers:
FlexOffice Standard Art.No.778063
FlexOffice Advanced Art.No.778064
FAQ - FlexLine plus V.4.5.doc
st .
- Art. No. 778084
- Art. No. 778080
- Art. No. 778087
Page 16/18