Table of Contents
Advertisement
Top MV cables entry cover
Output terminal
(Top cable entry)
Input terminal
(Top cable entry)
Input terminal
(Bottom cable entry)
Output terminal
(Bottom cable entry)
Bottom entry cover
All in one cabinet structure is compact when the output voltage is 3.3kV. Before cabling
you should disassemble the outer FRP first. And then remove the screw and pull the FRP
out along the arrow to free up the working space if necessary, as shown in Fig.6-14.
Recovery action is required after finishing cabling.
Fig. 6-13 Bottom Entry and Top Entry
Fig. 6-14 Diagram of Working Space
Advertisement
Table of Contents
