Alarm Fault - Delta Electronics MVF2000 Series Product Manual

3-4 Alarm Fault

When the system has an alarm/ Fault, "Alarm Fault" button will flicker.
Press "Alarm Fault" button on the HMI main menu to enter into the Real-time alarm& fault
interface, as shown in Fig. 3-7.
This interface aims at recording alarms, faults in real time.
Press "Audible& Visible Alarm Reset" button to reset audible& visible alarm signal.
Fig. 3-6 fault code explain interface
Fig. 3-7 real-time alarm& fault interface
27