System Status - Delta Electronics MVF2000 Series Product Manual

Running: When the main control system has no failure, and the system detects the
operation in normal operation, the "Running" indicator will light up.
The functions of each key in the main interface will be described hereinafter:

3-2 System status

Press "System Status" button on the HMI main menu to enter into the running status
interface, as shown in Fig. 3-2.
Under HMI operation mode, a "start" order can be sent to the MVD by
pressing this key. When the MVD is in operation, this key is disabled. If the
MVD is in deceleration stop state or stop state, the key can be pressed to
restart the MVD.
Under HMI operation mode, the MVD can be shut down freely by pressing
this key.
Under HMI operation mode, the MVD can be shut down at a decelerating
frequency by pressing this key.
This key is used to reset the MVD fault status. When the system is in
operation, this key is invalid.
Display the three phase voltage, current, transformer temperature, History
Graphs, software version. See 3-2 for details.
Display the fault code and DC BUS voltage of power cell. See 3-3 for
details.
When the system has an alarm/ Fault. this key will flicker, and the specific
alarm information can be seen by pressing this key. See 3-4 for details.
Operation mode, reference mode, password, language, data, time, HMI
brightness, parameter setting. See 3-5 for details.