Setting①: Initial Setting Select - Mitsubishi Electric KD Series User Manual

Address Register name
7200 UserSet_1_Save
7204 UserSet_2_Save
7208 UserSet_3_Save
720C UserSet_1_Load
7210 UserSet_2_Load
7214 UserSet_3_Load
UserSet_Load_Factory
7218
Defalut
7240 UserSet_BootSet_sele
ct
5-2-2 Initial Setting Select 1
[Function]
Save and read CIS Initial Setting
After power ON, this product boots an Initial Setting which
is selected by the value of "UserSet_BootSet_select".
By running a function of "UserSet_#_Save", the active CIS
settings can be saved or stored on a Flush Memory on this
product. (For example, values of CIS Setting, White/Dark
Correction, and γ Correction.)
You can save 3 different User Settings (from 1 to 3).
By running a function of "UserSet_#_Load", this product
booth the selected User Setting.
TM-XH719C
5-2 Setting①: Initial setting select
R/W Val
R/W 1 Save CIS settings to User Setting 1 on Flush Memory.
R/W 1 Save CIS settings to User Setting 2 on Flush Memory.
R/W 1 Save CIS settings to User Setting 3 on Flush Memory.
R/W 1 Read out CIS settings on User Setting 1.
R/W 1 Read out CIS settings on User Setting 2.
R/W 1 Read out CIS settings on User Setting 3.
R/W 1 Read out CIS settings on Factory Setting (Initial Setting).
R/W 0 to 3 Select a setting to boot after power-ON.
0:Factory Setting, 1:User Setting 1, 2:User Setting 2, 3:User setting 3
COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
1
Result
[Remark]
1) Any setting of communication over CoaXpress® cannot
be saved or stored. The initial value at the following
register is always a fixed value after power ON.
Register name
LinkConfig
2) Never turn off the product while UserSet _ # _ Save is
running. This product may be not able to operate normally
due to break setting data for saving.
(For products with DeviceFirmwareVersion 1. 4. *. *,
when this product detect to break the user setting data
automatically, factory setting is loaded instead of user
setting data when turn on this product.)
CoaXpress® is a trade mark registered by JIIA (Japan Industrial Imaging Association).
Initial
CXP6_4
Initial
-
-
-
-
-
-
-
0
73