Appendix C: How To Connect With Frame Grabber - Mitsubishi Electric KD Series User Manual

A setup sequence in Chapter 4-1) is described in below.
・Run Device discovery process by control software attached with your frame grabber.
・Control CIS by the control software attached with your frame grabber.
①APX-3664 manufactured by Avaldata
②Radient eV-CXP manufactured by Matrox
①APX-3664 manufactured by Avaldata
【Device discovery process】
1) Initiate Control software TransFlyer – Tsight.
When initiating the software, the device discovery process is automatically operated. When
you re-operate the device discovery process, select "Discover Cameras" on the tab of
"Operation".
TM-XH719C

Appendix C: How to connect with frame grabber

COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
100