Rotenso Control Series Installation And User Manual page 95

Two - line controller address selection
Restore factory Settings
When the air conditioning unit is off, into the query function
of temperature, press „ " or „ " to select Adr, the temperature
zone will display -- or A, B. Where -- refers to the code setting of
the wire controller.
Press "Confirm" into setting state, press „ " or „ " to select , then
press "Confirm" to complete it
: The code setting
: The wire controller address setting.
When the air conditioning unit is off, into the query function of
temperature, press „ " or „ " to select INIt, the temperature zone
displayed --.
Press "Confirm" into setting state, press „ " or „ " to select to
"ON" , then press "Confirm" to complete it.
: Restore factory Settings.
LOKA HAHB remote control
of the wire controller shall prevail.
Installation and user manual
EN
95