NOTE:
Put on a flat surface. Be careful not to distort the back plate of the wire controller by
overtightening the mounting screws.
4. Battery installation
• Put the battery into the installationsite and make sure the positive side of the
battery is in accordance with the positive side of installationsite.(See Fig.3-5)
• Please set the time corrected on the first time operation. Batteries in the wire
controller can time under power failure which ensure the time keep right. When the
power restores, if the time displayed is not correct, it means the battery is dead and
replace the battery.
LOKA HAHB remote control
Fig. 3-5
Installation and user manual
EN
57
Need help?
Do you have a question about the Control Series and is the answer not in the manual?