Fault Alarm Handing; Technical Indication And Requirement - Rotenso Control Series Installation And User Manual

13. FAULT ALARM HANDING

If the system does not properly operate except the above mentioned cases or the above
mentioned malfunctions is evident, investigate the system according to the following
procedures.
No. Malfunction & protection define
Error of communication between wire controler
1
and indoor unit
The error displayed on the wire controller are different from those on the unit. If error
code appears, please check the <<Owner's And Installation Manual>>and<<SERVICE
Manual>>.

14. TECHNICAL INDICATION AND REQUIREMENT

EMC and EMI comply with the CE certification requirements.
LOKA HAHB remote control
Display digital tube
Installation and user manual
EN
91