Troubleshooting - Gira System 3000 Operating Instructions Manual

System 3000
Motion detector top unit 1.10 m Komfort BT, Motion detector top unit 2.20 m
Komfort BT
Parameters Setting options,
default setting
Maximum dim- 1 ... 100%
ming value
Default setting:
100%
Minimum dim- 1 ... 67%
ming value
Default setting:
100%
Night light/basic Do not use func-
brightness tion
Use basic bright-
ness
Use night light
Default setting:
Do not use func-
tion
Adjusting basic 5 ... 100%
brightness
Default setting:
20%
Setting the night 5 ... 100%
light
Default setting:
20%
Colour temperat- Minimum colour
ure temperature
2000 ... 4500 K
Only DALI Power
control unit Maximum colour
temperature
5000 ... 10000 K
Switch-on colour
temperature
2000 ... 10000 K
Factory setting:
Minimum colour
temperature
2000 K, max-
imum colour tem-
perature 6000 K,
switch-on colour
temperature
2700 K

10 Troubleshooting

Motion detector does not switch on
Cause 1: The ambient brightness is greater than the adjusted brightness threshold.
Set the brightness threshold via app.
32599722 10865948
Explanation
Specifies the maximum settable brightness.
Specifies the minimum settable brightness.
Basic brightness:
If the function is activated, the light is switched to the
switch-on brightness when motion is detected. After the
run-on time has elapsed, the light is not dimmed off but
is dimmed to a defined brightness value.
Night light:
When the function is activated, the light is not switched
on to the switch-on brightness but to a defined bright-
ness value when motion is detected.
Determines the brightness of the basic brightness func-
tion.
Determines the brightness of the night light function.
Minimum colour temperature: Defines the minimum col-
our temperature that can be set.
Maximum colour temperature: Defines the maximum
colour temperature that can be set.
Switch-on colour temperature: The light is switched on
with a saved colour temperature.
13.07.2022
15 / 16