Maintenance; Inspection Before Use - Nuvo INVU User Manual

Maintenance

Inspection Before Use

7 Maintenance
This section describes how to maintain the INVU Sensor Band™.
7.1 Inspection Before Use
If the INVU Sensor Band™ package, INVU Sensor Band™, or any of its accessories are
damaged or are not intact — do not use the device and contact Nuvo Group customer
support.
Make sure to inspect the items below. If there is any problem, contact Nuvo Group
customer support.
•
Figure 7-1. INVU Sensor Band™ exterior view (the outer side)
Item
2- Controller with On/Off power button
1- Rear closing strap
6- Upper frontal adjustment straps (×2)
3- Lower frontal adjustment straps (×2)
4,5- Textile band
7- Side plastic with the band QR-code
Figure 7-2. INVU Sensor Band™ interior view (the side facing abdomen skin)
64
Inspection
Press the power ON/OFF switch on the control
unit to see if the power lamps on the control unit
light up. Check if the battery has been charged.
Check all straps (the inner side or outer)- for any
damage-tear, wear or fabric layers separations.
Check textile band (the inner side or outer) for
any damage- tear, wear or fabric layers
separations.
Check for any damage in the QR code sticker.
Nuvo Group Ltd.