Nuvo INVU User Manual page 26

First Time Using INVU by Nuvo™
Onboarding Process
Point your mobile device camera at the QR code, located on the plastic cover of the
INVU Sensor Band™ controller.
Make sure the camera is focused on the QR code; if necessary, tap on the screen to
enable camera focusing on the QR code. Verify you have sufficient lighting on the QR
code to enable the scan and try avoiding light reflections. Verify your camera is clean
before scanning.
The device automatically scans the QR code once your smartphone camera is positioned
properly over the code.
When your INVU Sensor Band™ and mobile device are connected, "connected"
indication appears and the Controller LED lights turns steady Blue.
Your band is ready for use.
20
Band QR-
code
Figure 4-5. Band QR code
Figure 4-6. QR Code location
Back to
home screen
QR code
location
Nuvo Group Ltd.