Nuvo INVU User Manual page 27

Note:
After the band connection is established, you have twenty five minutes to start a
monitoring session. If a monitoring session is not initiated within these twenty five
minutes, the band will turn itself off automatically.
device to start the monitoring session.
Note:
Once the band connection is established, the next time the band is activated the
connection will be automatically established (pending Bluetooth is enabled on your
device). Scanning the QR code is only required for your initial connection.
Train with Your INVU Sensor Band™
Training on how to use your INVU Sensor Band™ is part of your first use of INVU by Nuvo™. During
training we will walk you through putting on and using your band for optimal monitoring. This process
may take up to 15 minutes.
Make sure to complete your training sessions before your first clinical monitoring session.
To start training, press "PREPARE FOR TRAINING " on the app home page (for detailed information on
the training session see section Error! Reference source not found.).
Note: We do not perform any clinical monitoring of you or your baby during training.
Note: Once you have completed your training as part of your onboarding process, you will
be able to initiate additional training sessions from the app's help and support menu.
NV-UMLS-0012
Figure 4-7. System message after pairing completion
Invu by Nuvo™User Manual
First Time Using INVU by Nuvo™
In this case, you can turn on the
21