Repackaging The Invu Sensor Band - Nuvo INVU User Manual

7.3

Repackaging the INVU Sensor Band™

To protect the INVU Sensor Band™ and keep it in good operational conditions, repackage
the INVU Sensor Band™ after using it and for storage purposes.
Clean the band as described in section 7.2 above.
Open the INVU Sensor Band™ carrying case zipper and spread its fabric wings.
Note:
The carrying case has circular cavities below the fabric wings. These cavities are
designed to accommodate the band sensors.
Place the INVU Sensor Band™ center section in the carrying case, verifying the band
sensors are in the package cavities.
Fold the right back strap inward, above the band center section.
Fold the left back strap (with the controller) inward on top of the right back strap.
Cover the band with the case fabric wings and close them with their Velcro strip.
Insert the power supply and the gel tube into the pocket of the carrying case cover net.
Close the carrying case with its zipper.
NV-UMLS-0012
Figure 7-5. Band center section in carrying case
Figure 7-6. Folding the back straps
Figure 7-7. Carrying case with all components
Invu by Nuvo™User Manual
Maintenance
69