Nuvo INVU User Manual page 69

While updating is in progress keep your phone near your sensor band, and don't close the
INVU App™. In the case that the app was closed during the process, load the app again and
the update process shall continue.
During this process the controller LED lights will blink, alternating between green and blue.
Once the update is completed, the INVU App™ shall reconnect to the INVU Sensor Band™ and
you will be able to continue with conducting the monitoring session. The new band software
version will be displayed in the settings screen.
Note:
You cannot initiate a session without first completing the INVU Sensor Band
software update, if one is required.
Note:
Your INVU Sensor Band
update.
NV-UMLS-0012
Figure 6-45. Update in progress screen
Figure 6-46. Update completed screen
™
battery level should be at least 20% to perform the
Invu by Nuvo™User Manual
The INVU™ App
Update progress
bar
™
63