Charging The Invu Sensor Band™ Battery - Nuvo INVU User Manual

Note:
Make sure that one of the indicator lights is lit at all times during a monitoring
session.
The battery is integrated into the INVU Sensor Band™ Controller and is charged by the
medical-grade power supply through the USB type C connector. The medical-grade power
supply is supplied as part of the INVU Sensor Band™ package.
•
Charging time (from an empty battery to a fully charged battery) is around two hours.
•
Under typical conditions, a fully charged battery will provide ~4.5 hours of continuous
monitoring.
Note: The
INVU Sensor Band™ battery is pre-charged before shipping. However, it is
recommended recharging it before first use to a fully charged battery.
3.3 Charging the INVU Sensor Band™ Battery
Warning:
Remove the INVU Sensor Band™ from your body before connecting the cable
for charging! Do NOT charge the battery while the INVU Sensor Band™ is worn.
Caution:
Do not use any other charging cable or a power supply other than the one
supplied in the INVU Sensor Band™ package!
Caution:
Always secure the cable of the charger while charging the INVU Sensor Band™ to
avoid potential strangulations.
Power OFF the INVU Sensor Band™.
Note:
INVU Sensor Band™ battery can be charged ONLY if the INVU Sensor Band™ power
is OFF. Attempting to charge the INVU Sensor Band™ when it is powered ON will
automatically power it OFF.
Remove the band from your body before charging. For additional information see
"Removing the INVU Sensor Band™ " in section 5.3.
NV-UMLS-0012
Figure 3-5. Charging INVU Sensor Band™ battery
Invu by Nuvo™User Manual
Know Your INVU Sensor Band™
13