Main Function Operation - Haier QBJ1-130A58E Instructions For Use Manual

Using Instruction
and exit from the set mode. Continue to press
adjustment.
(2)Take turn press
30~80 );water level (adjusting range:2~4 level); hour of clock, minutes of clock;
hours and minutes of water supply time; choosing between antifreeze and pressure
mode. Flowchart shows as follows:
Enter i n to set
Temperature
Exit set
(3)When the number is being adjusted, press the key sustainably, the number
will speed up.
(4)When the hours or minutes of the clock are flickering, it means the clock is
being adjusted; when
flickering, it means water supply is being adjusted;
or minute are flickering, it means electric heating time is being adjusted.
5. When the system is in set mode (setting parameters are flickering ), except the
function which is being set, there is no effect on the other functions. For example,
the water supply time can be adjusted while heating.

Main function operation

1.Manual water supply
(1)When the water level below the set level, press
can reach the set water level automatically.
(2)When the water level is equal to or higher than the pre-set water level, press
key , water can be supplied until the water tank is full.
(3)In the process of water supply, press
key to adjust pre-set temperature (adjusting range:
Water level Clock (h/min)
Anti-fre eze/Pressure
turns bright and hour or minute of clock are
5
key to enter the next
Water suppl y time (h/min)
Electric heating time (h/min)
turns bright and hour
key , the water
key again, it will stop.