Operation And Functions - Haier HP200S1 Operation And Installation Manual

Operation and functions

Display
Description of the pictograms
Symbol
Working mode selection:Press the key, the AUTO mode, ECO
mode, ECO+ mode,VAC mode is displayed in turn.
Press SET or wait 6 seconds the mode is selected.
Timer adjust:press this key, then Press the + and - to adjust the
time.
Turn on or off fast heating function：Heat pump and Auxiliary
electrical heater are activated at same time.
AUTO
ECO
SET

HP HC
ACT
!
START
STOP
ERROR
MODE
TIMER
Description
Power ON/OFF switch
When turned off, the display shows the time and the actual water
temperature. When turned on, the display shows the working
mode.
The default temperature setting is 55°C in the factory. It can be
adjusted simply by pressing + & - directly on the default display.
Confirm button
$
VAC BOOST
ECO+
HW
1
2
SET
BOOST
24