ASSEMBLY GUIDE
The PTO shaft with the slip clutch is attached between the 90 degree gearbox and the tractor,
as shown in Figure 20. The slip clutch (the wider end with the springs) attaches to the mower,
while the other end attaches to the tractor.
Figure 20 shaft with slip clutch end
As with any new implement, the shaft that attaches to the tractor may need to be cut to
length. Consult the included Ibex Equipment PTO Shaft Cutting Guide.
The PTO shaft with the one-way clutch installed between the 90 degree gearbox and the
mower's drum unit, as oriented in Figure 21. Install the thicker clutch end so that it is attached
to the drum unit.
Figure 21 connect the driveline with one-way clutch
2022-1.1 IBEX EQUIPMENT CO.
11