IBEX TS51C Assembly Manual page 17

ASSEMBLY GUIDE
you may look different than in the picture. Often standard flat washers are provided as
shown in the Hardware Guide on p.4 instead of the odd-shaped washers shown. Install the
washers in whichever configuration places the pivot restrictor plate in a straight vertical
position (plumb).
Figure 23 pivot restrictor plate & handle installation
Figure 24 pivot restrictor plate & handle shown installed from side
The pivot restrictor handle should be tightened during transport only. During mowing, the
handle is loosened so that the mower pivots freely within the range allowed by the slot in the
restrictor plate.
2022-1.1 IBEX EQUIPMENT CO. 13