IBEX TS51C Assembly Manual page 13
Drum mower
Hide thumbs
Also See for TS51C:
- Assembly and quick start manual (22 pages) ,
- Assembly manual (22 pages) ,
- Assembly manual (23 pages)
Table of Contents
Advertisement
ASSEMBLY GUIDE
Install the washer and nut on the pivot pin. The nut is a nylon locking nut and should not be
over-tightened. Insert a screwdriver in the hole in the pin if necessary to prevent it from
turning while securing the nut.
Figure 17 pivot pin installed
STORAGE STAND
Install the storage stand as shown in Figure 18 using the clip provided (Figure 2, H).
Figure 18 storage stand
2022-1.1 IBEX EQUIPMENT CO.
9
Advertisement
Table of Contents
