ASSEMBLY GUIDE
TRANSPORT LOCK
Install the transport lock for the spring arm as shown in Figure 19 using the nut/bolt found in
the hardware bag (Figure 2, M).
Figure 19 transport lock installed
PTO SHAFTS
Grease the U-joints and the plastic bearings of the PTO shafts before assembly. Your mower
comes with two different PTO shafts, one with a slip clutch and another with a one-way clutch.
It's important to install them in the correct location, and in the correct direction. Examples of
the two clutches are shown below. Note that the shafts that come with your machine may
appear slightly different or be a different color.
Slip Clutch
One-Way Clutch
2022-1.1 IBEX EQUIPMENT CO.
10