Grizzly T34064 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T34064 Infeed/Outfeed Extension
Wings for the Model G1026 3 HP Shaper are
constructed of precision-ground cast iron and
measure 21 ⁄ " long, 10" wide, and 1
3
4
mounting template, drill bits, plug tap, and mount-
ing hardware are included.
Inventory
Main (Figure 1)
A. Extension Wing (Left) ................................. 1
B. Extension Wing (Right) ............................... 1
C. Mounting Template ..................................... 1
D. Drill Bit 4mm ............................................... 1
E. Drill Bit ⁄ " ................................................. 1
5
16
Plug Tap ⁄ "-16 ........................................... 1
3
F.
8
G. Cap Screws ⁄ "-16 x 1
3
8
H. Flat Washers ⁄ " ......................................... 8
3
8
Lock Washers ⁄
3
I.
8
A
D
E
F
Figure 1. Main inventory.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄ " tall. A
1
2
⁄ " ............................ 8
1
4
" ....................................... 8
B
I
G
H
COPYRIGHT © JANUARY, 2024 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 12/23) #JA23029 PRINTED IN TAIWAN
***Keep for Future Reference***
MODEL T34064
INFEED/OUTFEED
EXTENSION WINGS
Installation
Qty
The extension wings must be mounted before
they can be used. Before beginning the assembly
process, refer to Items Needed and gather all
listed items. To ensure the assembly process
goes smoothly, first clean any parts that are
covered or coated in heavy-duty rust preventative
(if applicable).
C
Items Needed
Hex Wrench 8mm .............................................. 1
Safety Glasses (Per Person) ........................1 Pr.
Painter's Tape .................................... As Needed
Power Drill ......................................................... 1
T-Handle Tap Wrench #0-
Shop Rags ......................................... As Needed
Degreaser Solvent ............................. As Needed
INSTRUCTIONS
Wear safety glasses during
the entire setup process!
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting extension wings. To
reduce this risk, get help
from other people and
use a forklift (or other lift-
ing equipment) rated for
weight of the wings.
⁄ " ............................. 1
1
4
Qty
V1.01.24